Short Course on Inks – Getting to Square 1

How to Refill Your Toner in Steps With the advancement in the technology word, printing has gone a step higher. This is due to the introduction of laser printer toner. You should always refill your toner when your printing starts to fail. You might tend to think that your cartridge is worn out but it is your toner that is out. Cartridges are manufactured in such a way that they will wear out after some years. Knowing the right time to add your toner is the secret to making your toner last longer. This will help to extend its life. The reason for this is because each and every cartridge is made to work with a specific chemical type toner, gain size and weight. These are the specific details that make it work with only that cartridge that cannot work with any other cartridge. Knowing how to add the toner is another thing you have to know. This is why you need to know the steps on how to refill the toner. They are the following. The first thing that you have to do with your toner at hand is to locate the fill hole. All cartridges do have holding tanks that hold the toner power. Some cartridges do have refill holes while others do not. After purchasing the refill kit you will get an instruction guide on how to do it. You will have to create a hole on your cartridge if it does not have a fill hole. You should not do this anywhere because you might end up destroying it. Often at times the hole is supposed to be created in either ends and not in the middle, mostly the side that faces up. The toner comes with the specific cartridge that it can work with. This is where the second step come in. You will now need to pour the toner. You should read the instructions on it and make sure that it is the right one. Check the expiry date on the toner and see if it is still good. The toner kit also has got a funnel that you fit in the toner cup so that you do not spill the toner.
What Do You Know About Inks
Releasing the fill hole is the last and final step. If your cartridge is that which has a hole, you will have to return the cup to cover the hole. Refill kits for cartridges where you have to burn a fill hole usually comes with a specific aluminum plate for the job. You will use the tape to cover the hole. You will then gently shake the cartridge to evenly distribute the toner. You will now reinsert tit to the printer and start printing once gain.News For This Month: Inks